Pistol Grip Set
Consists of: (1) TR-DH handle, (1) AD-1420 female), (1) AC-CS, (1) GoPro tripod mount (light and camera are not included. The GoPro has the ability to photograph upside down in its software. When ordering please order "Pistol Grip" then you will get all necessary hardware required.
If you are making this up from your ULCS parts at home: Put the AD-1420 on the stud sticking out of the bottom of handle which now becomes the top of the handle, use the enclosed stud to go between the tripod mount and the now bottom of the handle. Recommend loc tite glue it in or use super glue.
GoPro Tray & Handle
Ultralight has trays and a handle to allow topside or underwater photographers to mount the camera. It can be mounted on the a tray with a handle. Then a light can be mounted to the handle if required.
TR-GP is a single tray (comes with the tripod
mount). The handle is TR-DHB, ordered separately
TR-GPD is the double tray includes the tripod mount. The handles are TR-DHB and have to be ordered separately.
TR-GP-3D for your 3D GoPro housing, You may add two handles and one or two lights. Tray comes with the tripod mount.
Since GoPro does not make 3D housing any longer, this tray is just a longer version of the double tray and used by many instead of a double tray.
GoPro ball Mount
AD-GO adapter allows you to attach your GoPro to a DSLR camera. The ball is permanently mounted to a Gopro tripod mount, so it will not spin off. You will need the fixing bolt from your GoPro camera and a ULCS clamp and ball on the top of your housing.
This long clamp, the AC-CSL gets the camera out further.
We have a solution to not using the tabs to connect your GoPro. Want to put your GoPro on a pole cam to bait the sharks?? We now have a cage to go over the housing, allowing you to put a ball on it without having to use the plastic tab pieces at the bottom.
|Cage to go over a GoPro Hero1, 2, 3, 3+
with a regular back
|Cage to go over a GoPro Hero 1, 2, 3, 3+ with a LCD Back or battery back pac.
The LCD/Batt cages have the ability to
have 3 balls attached to it or position the
one ball in 3 spots.
|Cage for the 3D Housing|
For those who want to have a permanent mount to their jet ski, motorcycle or mountain bike, you can use our BA-AQ either wide or narrow, supplied with 2 1/4-20 screws.
Then you would use a clamp to mount the BA-AQ to the cage or AD-GO