Getting Started - If You Own a Digital Still Housing
TR-DM
New digital tray for housings with two screw holes for attaching on the bottom.
Housings for this tray: Ikelite small and medium with female threads on the bottom,
Olympus Pen housing, (PT-EP01), PT-E05, PT-E06, Fisheye Fix housings
Will accept either the AC-H or the TR-DHB handle
Will accept the TR-DUPL on the right side to make it a double tray for dual strobes
A second handle, AC-H can be added or the AD-3816-2 ball
DIGITAL TRAY AND HANDLE SYSTEM
TR-D and TR-DHB, for use with most small polycarbonate housing made by
Olympus, Sony, Minolta, Casio, Panasonic, Canon, Sea and Sea and others.
This tray can be upgraded
to a double tray with our TR-DUP (below)
If you would like to
have a strobe on the right side or a spotting light, then
you would add a ball (AD-3816-2) to the tray
The extra vertical piece(block)
does not have to be added, screws are supplied for attaching the tray
to the upgrade without the drop down.
If all you need is
a tray and handle and a spotting light then this set up is
what you need
The TR-D
has a handle TR-DH with a spotting light adapter
AC-SPL attached
If you want to put
a arm for a strobe on this handle you need to take off the spotting light
and add a ball BA-HB
If you want both the
ball and the spotting light adapter then you need
to attach the mounting plate BA-FBd and then
both will work
This is a picture of
it all attached 
For small Ikelite housings that
have two threaded holes in the bottom we would also recommend
this tray. We would remove the screw in the middle and send two 12/24 screws
with washers
that mount in the horizontal slots of the tray. Please request these screws
if you have one of
these housings. (See below) Now use the new tray TR-DM, see picture beginning of page
If you need to add a Ikelite
controller to this handle, you would remove the ball and add our
AD-TTLd. It screws directly into the handle after you have put the controller
on it.
You then tighten the nuts onto a lock washer to keep it from unscrewing.
New
Ikelite tray TR-IK desinged for the mid size housing
(the housings have 3/8 bolts with nuts protruding below the housing)
For all you G9, 10, 11 housing owners, this tray and handle gives you
a light weight option.
Takes AC-H or AC-HQD handle which can be adjusted left or right depending
on how close you would like your hand to the housing
This housing will also work on the Olympus E-Volt housing and the Inon Rebel XTI
Pivot (CP-Oly) for Olympus housings and many others
This is the bottom
of the pivot showing the additional plate
that needs to be attached
to the bottom plate to work on this Olympus housing.
Ikelite's Digital housings and their tray and quick disconnect handle
Ikelite's tray and quick disconnect handle will accept Ultralight arms.
They have a push button handle that will accept the our BA-IK
the BA-IKT (on right picture below) inserted into the Ikelite handle.
Other digital housings:
Please contact us with your particular brand of housing and we can figure
out a base adapter, tray or maybe a pivot for it.
tm